Drywall Calculator
Drywall sheets are cheap and delivery is not — running one sheet short costs a second trip. Enter the room, choose your sheet size, and get sheets, compound and screws in one answer.
Doors and windows are not subtracted — standard practice, because the 10% waste allowance covers the openings on a typical room. Fewer cuts, fewer mistakes.
How to use this calculator
- Measure the room: length, width and wall height.
- Choose the sheet — 4 × 12 ft means fewer joints but needs two people and a clear path in.
- Tick the ceiling if you are boarding it too.
- Read the answer: sheets with 10% waste, compound buckets and screw weight. Print the list.
How the maths works: wall area = room perimeter × wall height; ceiling = length × width. Sheets = total area ÷ sheet area, plus 10% for cuts and breakage. Joint compound ≈ 0.6 buckets per sheet and screws ≈ 1 lb per 250 sq ft — both labelled estimates; taping style and corner count move them. The full guide to the drywall calculator works a whole room sheet by sheet — 4×8 against 4×12, compound and screws included.
What are you using this for?
Tell us what you are making, and we will help you do it yourself. Type your project below — for example “boarding a basement rec room” — and we will show you the full method, step by step, using the estimate you just made.
A worked example
A 12 ft × 12 ft room with 8 ft walls and a ceiling: walls are 48 ft of perimeter × 8 = 384 sq ft, plus 144 sq ft of ceiling = 528 sq ft. In 4 × 8 sheets: 528 ÷ 32 = 16.5, plus 10% → 19 sheets, with about 12 buckets of joint compound (estimate) and 3 lb of screws.
Keep going
Painting the room afterwards? The Paint Calculator. Tiling a floor in it? The Tile Calculator. Measuring the room itself? The Square Footage Calculator.
Questions people ask
Should I use 4 × 8 or 4 × 12 sheets?
4 × 12 sheets mean fewer joints to tape and a flatter wall, but they are heavy, awkward on stairs and need two people. Most DIY rooms are boarded in 4 × 8 for a reason.
Why don't you subtract doors and windows?
Standard estimating practice: the cut-out pieces are mostly waste anyway, and the 10% allowance covers openings, cuts and the odd damaged sheet in one honest number.
How much joint compound do I need per sheet?
About 0.6 of a standard bucket per 4 × 8 sheet for tape, fill and finish coats — an estimate. Beginners use more; buy from a store that takes back unopened buckets.
How many screws go into drywall?
Roughly 1 lb of screws per 250 sq ft of board. Walls are typically screwed every 12 in on edges and 16 in in the field — always follow your local code and the board maker's pattern.
Are the costs exact?
No — typical store-price ranges for your country. This is an estimate — prices can go up or down.