Flower Bed Calculator
A flower bed asks three questions at the garden centre — how many plants, how much mulch, how much edging — and punishes guessing all three. This calculator answers them together from the bed’s dimensions: plant counts on square and staggered grids at mature-spread spacing, mulch volume at your chosen depth, and the perimeter that edging is sold by.
Spacing means the plant's spread when grown, from its label — the single most-skipped fact in bed planning. Three inches of mulch is the flower-bed standard: enough to suppress weeds and hold moisture, not so much it buries crowns.
How to use this calculator
- Measure the bed (for a circle, the radius — centre to edge).
- Enter the plants' mature-spread spacing and your mulch depth.
- Read plant counts for both grids, mulch in yards and bags, and edging feet.
- Print the list and take it to the garden centre.
How the maths works: plants = bed area ÷ spacing² on a square grid; a staggered (triangular) grid packs the same spacing into 0.866 of the area per plant, fitting about 15% more — worth it for groundcover sweeps, unnecessary for specimen planting. Mulch is area × depth, the same volume maths as the Mulch Calculator (which handles whole-yard mulching); edging is simply the perimeter. The full flower bed guide covers spacing by plant type and the layering that makes beds look designed.
What are you using this for?
Tell us what you are making, and we will help you do it yourself. Type your project below and we will show you the full method, step by step, using the estimate you just made.
A worked example
A 12 ft × 4 ft border (48 sq ft) planted with perennials spreading 18 in: square grid 48 ÷ 2.25 = 22 plants (staggered: 25). Mulch at 3 in: 12 cu ft = 0.44 yd³, six 2 cu ft bags. Edging: 2 × (12 + 4) = 32 ft. Three numbers, one trip, no second journey for two more bags.
Keep going
Mulching the whole yard? The Mulch Calculator scales up by area. Vegetable beds plant by the Plant Spacing Calculator and Row Spacing Calculator. Designing the bed itself: the Garden Designer draws it in 2D and 3D.
Questions people ask
Why does the staggered grid fit more plants?
Geometry: offsetting each row by half a spacing lets circles pack hexagonally, covering the same ground with each plant still at full spacing from its neighbours. The area per plant falls from spacing² to spacing² × 0.866 — about 15% more plants, each with the same personal space.
Should I really plant at mature spacing? The bed looks empty.
Yes — the emptiness lasts one spring; the crowding from ignoring it lasts until you dig and divide. Fill the first season's gaps with annuals sown or planted between the perennials: colour now, room later, and the annuals leave exactly when the perennials need the space.
How deep should flower-bed mulch be?
Three inches is the working standard for beds (two for fine mulches around small plants). Shallower lets weeds through; deeper risks burying crowns and, with fine bark, can shed water. Refresh the top inch yearly rather than re-laying the full depth.
How do I measure an irregular bed?
Break it into rectangles and circles on paper and run each through the calculator, then add. For a wavy border, measure the longest length and the average width — the over-estimate lands in the mulch, which is the forgiving direction.
Annuals or perennials — does the spacing change?
Annuals are planted at or slightly inside their spread since they get one season to fill; perennials at full mature spread, which for some (hostas, peonies) is a three-year promise. The calculator takes whichever spacing you give it — the label's spread figure is the one to trust.