Grass Seed Calculator
“A bag of grass seed” is not a quantity: Kentucky bluegrass sows at 2.5 lb per 1,000 sq ft while tall fescue takes 8 lb — the same bag covers three times the ground in one lawn as the other. This calculator starts from the grass type, the way seeding rates are actually published.
Rates are the mid-range published rates for pure seed of each type. Bluegrass seed is tiny — over a million seeds per pound — which is why its pound rate is the lowest and its patience requirement the highest: 14–30 days to germinate.
How to use this calculator
- Measure the lawn: length × width, minus beds and paths if they are large.
- Pick the grass type you are actually sowing — it sets the rate.
- Say whether it is a new lawn or overseeding; overseeding runs about half rate.
- Read pounds and 25 lb bags, then print the list.
How the maths works: total seed = rate (lb per 1,000 sq ft for your grass and job) × area ÷ 1,000; bags = total ÷ 25 lb, rounded up. The rates are the standard extension ranges — bluegrass 2–3, perennial ryegrass 6–9, tall fescue 6–10 lb per 1,000 sq ft for new lawns — at their midpoints. The full grass seed guide explains why the types differ so much and when each is the right choice.
What are you using this for?
Tell us what you are making, and we will help you do it yourself. Type your project below and we will show you the full method, step by step, using the estimate you just made.
A worked example
A 50 ft × 40 ft lawn is 2,000 sq ft. As a new tall fescue lawn at 8 lb per 1,000 sq ft it needs 16 lb of seed — 1 bag of 25 lb. The same ground in Kentucky bluegrass needs only 5 lb; overseeding the fescue next fall takes 8 lb. One lawn, three honest answers — all from the grass type.
Keep going
Counting seed for a vegetable bed instead? The Seed Quantity Calculator. Starting from bare ground entirely? The Sod Calculator prices the instant version. Feeding the new lawn: the Nitrogen Calculator.
Questions people ask
How much grass seed do I need per 1,000 square feet?
By type, for a new lawn: Kentucky bluegrass about 2.5 lb, perennial ryegrass about 7 lb, tall fescue about 8 lb, fine fescue about 5 lb, bermudagrass and zoysia about 2 lb. Overseeding runs about half those rates.
Why do the rates differ so much between grasses?
Seed size. A pound of bluegrass holds well over a million seeds; a pound of tall fescue holds roughly a quarter as many, much bigger seeds. Rates are set to deliver a similar number of viable seeds per square foot, not a similar weight.
Is more seed better, to be safe?
No — past the published rate, seedlings crowd, compete and invite disease, and the stand ends up thinner, not thicker. The rate on the label is a ceiling arrived at by trial, not a starting suggestion.
When is the best time to sow?
Early fall for cool-season grasses (bluegrass, fescues, ryegrass): warm soil, cool air, fewer weeds, and roots established before summer. Spring is second best. Warm-season grasses (bermuda, zoysia) sow in late spring into early summer.
My bag is a mix of grasses — which rate do I use?
The bag's own label rate. Blends are formulated so the mix rate already accounts for each component; the label overrides any single-type table, this one included.