Grow Light Calculator
Plants do not care how bright your light looks; they bank a daily total of photons, the DLI, and every growth difference between a stocky seedling and a leggy one is written in it. This calculator turns PPFD and photoperiod — or, in estimate mode, your fixture’s watts and coverage — into a DLI and judges it against published crop targets.
Watts-mode is an estimate: it assumes the fixture's output spreads evenly, which no real fixture does. The maker's PPFD map at your hanging height — or a PAR meter — is the exact input. Ignore 'equivalent watts' marketing entirely; only true watts and efficacy count.
How to use this calculator
- Choose your knowledge: a real PPFD figure, or the watts estimate.
- Pick the crop — its published DLI target loads.
- Set your photoperiod (14–16 hours is the seedling standard).
- Read the DLI and the verdict; adjust hours first (free), then distance, then fixtures.
How the maths works: DLI = PPFD × hours × 0.0036 — photons per second, accumulated over the day, converted to moles. Because hours and intensity multiply, the levers are interchangeable within limits: 150 µmol for 16 hours and 300 for 8 hours deliver the same 8.6 mol, though plants prefer the gentler, longer day. The full grow light guide covers hanging height, the inverse-square trap, and reading a PPFD map.
What are you using this for?
Tell us what you are making, and we will help you do it yourself. Type your project below and we will show you the full method, step by step, using the estimate you just made.
A worked example
A fixture delivering 200 µmol/m²/s at the canopy for 16 hours gives 200 × 16 × 0.0036 = 11.5 mol/day — squarely in the seedling range. The same light on a 12-hour timer gives 8.6 mol, the range's floor. In watts mode, a true-100 W modern LED (2.0 µmol/J) over 4 sq ft estimates about 540 µmol/m²/s at canopy — a reminder that small modern fixtures are strong, and that the estimate flatters evenness, which is why the map or meter rules.
Keep going
Starting the seedlings themselves: the Seed Starting Calculator sets their dates, and the Transplant Date Calculator plans their move outside. Warmth is the other half of the seedling bench — the Growing Degree Days Calculator tracks it outdoors.
Questions people ask
Why do my seedlings get leggy under a 'bright' light?
Because brightness to your eyes is not photons to a plant, and duration is half the recipe. A windowsill or a distant fixture may deliver 3–5 mol a day — a third of the seedling target — and seedlings stretch toward light they are starving for. Legginess is a DLI reading written in stems; this calculator exists to give you the number before the stems do.
More hours or more intensity — which lever first?
Hours, within reason: extending 12 to 16 hours costs a timer setting, and most seedlings thrive on 14–16 hours with a true night. Beyond about 18 hours returns fade and some crops object to near-continuous light. Then close the distance (intensity rises steeply), then add fixtures.
Can I trust a phone app as a PAR meter?
As a rough guide, cautiously — phone sensors read lux for human eyes, and conversions to PPFD vary with spectrum; dedicated PAR meters and makers' maps are the standard. An app that says 180 where the map says 200 is useful; one that cannot tell 80 from 200 is decoration. The watts estimate in this calculator has the same honest status: a starting point, not a measurement.
What DLI does a sunny windowsill actually give?
Less than it feels: glass cuts intensity, winter days are short, and a south window in January may deliver 3–6 mol — enough for low-light houseplants, half a seedling's need. It is the classic reason windowsill tomatoes stretch while the same seeds under a modest shelf light stay stocky.
Do plants need a dark period?
Yes — most do their respiring, translocating and (for short-day crops) flowering decisions in darkness, and seedlings grow best with a real night of 6–8 hours. The 16-on/8-off rhythm is standard because it respects both sides of the plant's day.