YardSolver app iconYardSolver is now an app —Get it on Google Play· iPhone app coming soon
YardSolver
Know what you need. Buy exactly that.

Soil pH Calculator

Step 1 · Type your numbers Step 2 · See your answer Step 3 · Print your list

Soil pH is not one-size-fits-all: the same half-unit move takes roughly twice as much lime on clay as on sand, because clay resists pH change. This calculator uses that buffer-based method — pick your soil type and it works from the texture tables extension services publish, then counts bags.

 

Target below current? The answer switches to elemental sulfur automatically. Most lawns and vegetables aim for pH 6.0–7.0; blueberries and other acid-lovers aim for 4.5–5.5. Rates assume ground limestone of standard fineness — a lab test that reports buffer pH refines the dose further.

How to use this calculator

  1. Test your soil and note the pH — a probe or home kit is enough to start.
  2. Pick the target pH for what you grow.
  3. Choose your soil type honestly — it changes the answer more than any other input.
  4. Measure the area, read the pounds and bags, and print the list.

How the maths works: the calculator looks up the lime (or sulfur) requirement per 1,000 sq ft for your pH change and your soil texture — the buffer method — interpolating between half-unit steps, then multiplies by your area. It deliberately does not use one flat rate per pH unit for every soil. The full guide to adjusting soil pH shows the tables and works a clay bed and a sandy lawn side by side.

What are you using this for?

Tell us what you are making, and we will help you do it yourself. Type your project below and we will show you the full method, step by step, using the estimate you just made.

A worked example

A 50 ft × 40 ft bed is 2,000 sq ft of loam at pH 5.5, aiming for 6.5 — a full unit to raise. Loam needs 92 lb of lime per 1,000 sq ft, so the bed takes 2 × 92 = 184 lb — 5 bags of 40 lb. The same bed in sand would need only 92 lb total; in clay, 230 lb. That spread is exactly why soil type is an input, not a footnote.

Keep going

Only need the simple bag count for a lawn? The Lime Calculator works by goal. Feeding next? The Fertilizer Calculator uses the real NPK method, and the Nitrogen Calculator sizes a single-nutrient product exactly.

Questions people ask

How much lime does it take to raise pH by 1 unit?
It depends on the soil, which is the whole point of the buffer method. Per 1,000 sq ft, one full pH unit takes roughly 46 lb of lime on sand, 69 lb on sandy loam, 92 lb on loam and about 115 lb on clay. Any calculator giving one number for every soil is guessing.

How do I lower soil pH instead?
Elemental sulfur. Soil bacteria convert it to acid over 2–3 warm months. Loam needs about 17 lb per 1,000 sq ft per pH unit; sand needs less, clay more. Split large doses — sulfur can scorch turf above about 10 lb per 1,000 sq ft in one pass.

Why does soil type change the dose so much?
Buffering. Clay particles and organic matter carry exchange sites that soak up the lime's neutralising power, so more lime is consumed before the pH itself moves. Sand has few exchange sites, so its pH moves easily — and overshoots easily too.

Is a home pH test accurate enough?
For choosing a rate band, yes — probes and kits are usually within a few tenths. For a big correction on clay, a lab test that reports buffer pH is worth it, because buffer pH is what actually sets the lime requirement.

How long until the pH actually changes?
Lime reacts over months; sulfur needs a warm season of bacterial activity. Apply in fall where you can, and retest after 6–12 months rather than stacking doses.