Board Foot Calculator
Updated November 17, 2026
One board foot = a board 1 inch thick, 12 inches wide and 1 foot long (144 cubic inches). Lumber yards price hardwood by the board foot. Remember: a "2x4" is really 1.5 x 3.5 inches — enter the real size for exact results.
How to use this calculator
- Measure each board: thickness and width in inches, length in feet — and count how many boards.
- Type the numbers in. Lumber prices differ by species, so treat the cost as a guide.
- Read the answer: total board feet and the estimated cost for your country.
- Print the list for the lumber yard — board feet is the language they price in.
How the maths works: The maths: one board foot = thickness (in) × width (in) × length (ft) ÷ 12. The calculator totals it across all your boards. The full guide to the board foot calculator works a bookshelf cut list board by board, and shows the nominal-size trap that changes the count.
What are you using this for?
Tell us what you are making, and we will help you do it yourself. Type your project below — for example “a patio base” or “my tomato bed” — and we will show you the full method, step by step, using the estimate you just made.
A worked example, step by step
Say you are building a small oak bookshelf and the cut list calls for 8 boards, each 1 inch thick, 8 inches wide and 6 feet long. A lumber yard prices that oak by the board foot, so here is every step the calculator does.
- Work out one board. Thickness × width × length ÷ 12: 1 × 8 × 6 ÷ 12 = 4 board feet per board.
- Multiply by the quantity. 4 × 8 boards = 32 board feet.
- Add a milling and defect allowance. Rough boards need jointing and planing, and some wood is lost to knots, checks and the ends you square off. Yards commonly suggest 10 to 15%: 32 × 1.15 = 36.8, so plan to buy about 37 board feet.
- Price it. The cost is simply board feet × the price per board foot for that species — the calculator multiplies your total by the typical range for pine, oak, maple or walnut in your country, so a species change shows up as a price change, not a quantity change.
- Check the nominal trap. A construction 2x4 measures 1.5 x 3.5 inches in reality: by real size it holds 1.5 × 3.5 × 8 ÷ 12 = 3.5 board feet for an 8 ft board, not the 5.33 board feet the nominal 2 x 4 numbers would suggest. Always type the size the yard is actually charging you for.
Type the numbers, see the answer, print your list: 32 board feet on the cut list, about 37 to buy.
Buying notes for lumber
Thickness is spoken in quarters. Hardwood yards describe rough stock as 4/4 (about 1 inch rough), 5/4, 6/4 and 8/4. After surfacing, 4/4 stock finishes nearer 3/4 inch. If your plan needs a true finished inch, say so at the yard — entering the rough thickness into the calculator is right for the bill, but your project dimensions must allow for what milling removes.
Random widths and lengths are normal for hardwood. Unlike construction lumber, hardwood boards come in mixed widths and lengths, and you pay for the whole board you take. Bring your cut list, pick boards your parts can actually come out of, and expect the tally to land a little above your neat number — that difference is the waste allowance doing its job.
Inspect before the tally. Sight down each board for bow, twist and cup, and check ends for splits. A cheap board that warps on the way home is the most expensive board in the pile. The board foot price only compares fairly between boards you would actually accept.
Softwood and hardwood are priced differently. Construction softwood is usually priced per piece or per linear foot at set sizes, while hardwood is priced per board foot. If a yard quotes you per board foot for ordinary 2x material, run it through this calculator before agreeing — the per-piece price at a home centre is often simpler and cheaper for small jobs.
Keep going
Building a raised bed from that lumber? Then the Raised Bed Soil Calculator fills it. Patio base instead? The Gravel Calculator.
Questions people ask
How do I calculate board feet?
Thickness (in) × width (in) × length (ft) ÷ 12, per board.
Are the costs exact?
No — typical per-board-foot ranges by species in your country. This is an estimate — prices can go up or down.
What exactly is a board foot?
One board foot is 144 cubic inches of wood — a board 1 inch thick, 12 inches wide and 1 foot long. Wider, thicker or longer boards simply hold more board feet.
Do I enter nominal or actual lumber sizes?
Enter the sizes on the price tag. Lumber is priced on its nominal size, so a 2×4 counts as 2 in × 4 in even though it actually measures about 1.5 in × 3.5 in.
Can I count several different board sizes at once?
Run each size separately and add the totals — the quantity box counts identical boards, which keeps mixed project lists honest.