Gravel Calculator
Updated November 17, 2026
Paths: 2–3 inches. Driveway base: 4–6 inches of crushed rock, compacted in layers. Decorative cover: 2 inches is usually enough.
How to use this calculator
- Measure the area: length × width of the path, drive or base, and the depth you plan (2–3 inches for paths).
- Type the numbers in and pick your country for local prices.
- Read the answer: gravel in cubic yards and tons for bulk delivery, or bags for small jobs.
- Print the list — for anything over a yard, bulk delivery is usually the cheaper route.
How the maths works: The maths: length × width × depth = volume in cubic yards; weight uses about 1.35 tons per cubic yard for typical gravel. The full guide to the gravel calculator explains the yards-to-tons conversion and works a whole driveway both ways.
What are you using this for?
Tell us what you are making, and we will help you do it yourself. Type your project below — for example “a patio base” or “my tomato bed” — and we will show you the full method, step by step, using the estimate you just made.
A worked example, step by step
Say you are rebuilding the gravel base of a small driveway, 20 ft long by 10 ft wide, at a finished depth of 4 inches of compacted crushed rock. Here is every step the calculator does.
- Find the area. 20 ft × 10 ft = 200 square feet.
- Turn the depth into feet. 4 inches ÷ 12 = 0.333 ft.
- Find the volume. 200 × 0.333 = 66.7 cubic feet.
- Turn volume into yards. 66.7 ÷ 27 = 2.47 cubic yards. Yards sell in whole or half yards, so you would order 2.5 cubic yards.
- Turn yards into weight. This calculator uses about 1.35 tons per cubic yard for gravel and crushed rock: 2.47 × 1.35 = about 3.3 tons (roughly 3.0 tonnes). You need this number if your supplier sells by the ton instead of the yard — the two prices only compare once everything is in the same unit.
- Compare bags. Bagged gravel is usually 0.5 cubic feet: 66.7 ÷ 0.5 = 134 bags. Nobody should move 134 bags for a driveway — past about a quarter of a yard, bulk delivery wins on price and on your back.
Type the numbers, see the answer, print your list: 2.5 cubic yards, about 3.3 tons, one delivery.
Common mistakes with gravel
Ordering in the wrong unit. One yard is a volume (27 cubic feet); one ton is a weight. For the gravel this calculator assumes, a cubic yard weighs about 1.35 tons, but wet sand-heavy mixes weigh more and light decorative stone weighs less. If a quote sounds strangely cheap, check which unit it is in before you compare it.
Spreading the finished depth loose. Gravel compacts. A driveway layer spread 4 inches loose settles to noticeably less once cars and rain work on it, and the calculator's depth is the finished, compacted depth. Spread in layers of about 2 inches and compact each layer, adding a little extra material rather than discovering a thin base in the first winter.
Choosing round stone where stone must lock. Pea gravel rolls underfoot and migrates off paths and driveways because the round pieces never grip each other. Crushed, angular rock locks together and stays put — use round stone only where movement does not matter, like a decorative bed.
Skipping edges and fabric. Without edge restraints, path gravel walks into the lawn a handful at a time; without landscape fabric under decorative gravel, it slowly sinks into the soil and disappears. Both are cheap on the day and expensive to redo later.
Keep going
Pouring a slab on that base? The Concrete Slab Calculator. Soil and beds instead? The Raised Bed Soil Calculator and the Topsoil Calculator. Building the base for a patio? Paver Patio Base sets the dig depth and the layer order first.
Questions people ask
How much does a cubic yard of gravel weigh?
About 1.35 tons (roughly 2,700 lb) for crushed rock — decorative stone runs a little lighter.
Are the costs exact?
No — typical per-yard ranges for your country, before delivery. This is an estimate — prices can go up or down.
How deep should gravel be on a driveway?
About 4–6 inches total over a compacted base for cars; 3 inches is enough for paths and patios that only carry feet.
How much area does one ton of gravel cover?
One ton is roughly 0.74 cubic yards (about 20 cubic feet), so at 3 inches deep it covers about 80 square feet.
What size gravel is best for a driveway?
¾ inch crushed stone with fines — the angular pieces lock together under tires. Round pea gravel rolls and migrates, so save it for paths and play areas.