Gypsum Calculator
Gypsum is the most misunderstood bag in the shed: it is not lime, it does not raise pH, and spreading it on any soil that "looks heavy" wastes most of it. It earns its keep in three specific jobs — conditioning clay, adding calcium without touching pH, and pulling sodium out of sodic soil. This calculator rates each job properly, including the lab-formula route for sodium.
Acid soil needs lime, not gypsum — use the Lime Calculator. Gypsum’s clay effect is real but modest and temporary; organic matter does the lasting work. Your soil test and the bag label override any general rate.
How to use this calculator
- Measure the area: length × width.
- Pick the job: clay conditioning, calcium, or sodium removal.
- For sodium, copy CEC and ESP from your soil-test report — no test, no formula.
- Read pounds and bags, spread evenly, and water in.
How the sodium maths works: sodium sits on the soil's exchange sites, measured as ESP (exchangeable sodium percentage). The gypsum requirement is the sodium to remove — CEC × (ESP now − ESP target) ÷ 100, in milliequivalents per 100 g — converted at 39.5 lb of gypsum per meq per 1,000 sq ft for a 6-inch slice. The calcium in gypsum swaps places with the sodium; the sodium then has to leach out with drainage water, which is why sodic-soil repair is a season's project, not a weekend one. The full gypsum guide covers what gypsum can and cannot do — including the blossom-end-rot myth.
What are you using this for?
Tell us what you are making, and we will help you do it yourself. Type your project below and we will show you the full method, step by step, using the estimate you just made.
A worked example
A 50 ft × 40 ft clay vegetable plot is 2,000 sq ft. At the standard conditioning rate of 40 lb per 1,000 sq ft it takes 80 lb of gypsum — three 36 lb bags, watered in. The same plot testing sodic (CEC 20, ESP 15% → target 5%) needs 2.0 meq/100 g exchanged: 79 lb per 1,000 sq ft, 158 lb in total — the formula route is a different job from the conditioning route, and the numbers show it.
Keep going
Not sure your soil is clay at all? The Soil Texture Calculator classifies it from a jar test. Acidity is a different fix — the Soil pH Calculator and Lime Calculator handle it. Building structure long-term: the Soil Amendment Calculator sizes the compost that does the lasting work.
Questions people ask
Does gypsum raise soil pH like lime?
No — this is the single most common gypsum mistake. Gypsum is calcium sulfate, a neutral salt: it adds calcium and sulfur and leaves pH essentially unchanged. Lime is calcium carbonate, and the carbonate is what neutralises acidity. Acid soil needs lime; gypsum cannot substitute.
Will gypsum fix my clay soil permanently?
No. Gypsum makes clay particles clump (flocculate), which improves drainage and workability for a season or two, and the effect is strongest on sodic clays. Lasting structure comes from organic matter, roots and not working wet soil — gypsum is a helper, not the cure.
Does gypsum cure blossom end rot on tomatoes?
Almost never. Blossom end rot is a calcium-delivery problem inside the plant, caused by uneven watering — most soils already hold plenty of calcium, which is why the standard advice is steady moisture and mulch. Gypsum only helps the rare soil that genuinely tests low in calcium.
What is ESP and where do I find mine?
ESP is the exchangeable sodium percentage — the share of your soil's exchange sites occupied by sodium. Above roughly 15% a soil is classed sodic: dispersed, crusty, slow to drain. It appears on a full soil-test report alongside CEC; a basic pH-and-NPK test does not include it.
Can I apply too much gypsum?
It is hard to damage soil with gypsum at these rates, but heavy over-application wastes money and can temporarily tie up magnesium and potassium. Stay with the rate for your purpose and retest rather than repeat blindly.