Potassium Calculator
Potassium is the third number on the bag — the nutrient behind sturdy stems, water regulation and fruit quality — and the one most often delivered by traditional sources like wood ash and greensand whose percentages are small and wildly variable. This calculator runs the standard single-nutrient method: the K₂O your soil test calls for, divided by the percentage on your product, so a 60% potash and a 3% greensand finally sit on the same scale.
Potassium targets come from a soil test: clay soils hold K well, sandy soils leak it and need smaller, more frequent doses. Wood ash percentages are averages — ash varies with the wood. The label rate on your product overrides any general rule.
How to use this calculator
- Read your soil test: it names the K₂O rate per 1,000 sq ft (or per acre — divide lb/acre by 43.56).
- Measure the area: length × width.
- Read the third number on your product — its K₂O percentage — or tap a preset.
- Read exact product pounds and bags, then print the list.
How the maths works: potassium needed = target × area ÷ 1,000. Product needed = potassium needed ÷ (K₂O% ÷ 100). So 1 lb of K₂O for 1,000 sq ft takes 1.7 lb of muriate of potash (60%) but 33 lb of greensand (3%) — same nutrient, honestly different piles. It is the same engine the Fertilizer Calculator runs with all three nutrients; this page isolates potassium. The full potassium guide covers sources, chloride, and why fruiting crops spend K fastest.
What are you using this for?
Tell us what you are making, and we will help you do it yourself. Type your project below and we will show you the full method, step by step, using the estimate you just made.
A worked example
A 50 ft × 40 ft vegetable garden is 2,000 sq ft. At the standard 1.0 lb target it needs 2 lb of actual K₂O. With muriate of potash (60%): 2 ÷ 0.60 = 3.3 lb of product — 1 bag. With sulfate of potash (50%): 4 lb. With wood ash at about 5%: 40 lb — roughly two full buckets, which matches how gardeners have always applied ash: generously, and by the bucket.
Keep going
Completing the set: the Nitrogen Calculator and Phosphorus Calculator run this same engine for the first and middle numbers, and the Fertilizer Calculator counts a full NPK bag at once. Using wood ash? Check what it does to pH with the Soil pH Calculator before spreading it on everything.
Questions people ask
Why is potassium written as K₂O on the bag?
The fertilizer trade's oxide convention — the percentage is the K₂O equivalent, not elemental potassium. Soil tests recommend in the same units, so this page's maths compares like with like and needs no conversion.
Muriate or sulfate of potash — does it matter?
Both deliver K₂O. Muriate (potassium chloride) is cheaper and more concentrated, but its chloride bothers sensitive crops — potatoes, beans, strawberries — and adds to soil salinity. Sulfate of potash costs more, carries no chloride, and adds sulfur. For most vegetable beds, sulfate is the gentle default.
Is wood ash a real potassium source?
Yes — hardwood ash averages around 5% K₂O, which is why the traditional rate is buckets, not handfuls. It also carries calcium and raises pH like a mild lime, so it is a poor match for acid-loving plants and for soil already alkaline. Never use ash from treated or painted wood.
Which crops use the most potassium?
Fruiting and storage crops: tomatoes, potatoes, squash, corn and fruit trees all export large amounts of K in the harvest itself. Leafy greens use less. A bed cropped hard every year spends its potassium bank steadily — the soil test shows the balance.
Can plants get too much potassium?
Yes. Excess K competes with magnesium and calcium uptake, so an over-potashed soil can show magnesium deficiency with plenty of magnesium present. It is another reason the target comes from a test, not from enthusiasm.