Soil Moisture Calculator
Watering schedules fail when they ignore the bank they draw on: a foot of silt loam holds nearly four times the plant-available water of a foot of sand. This calculator works from the published available-water capacities by texture — total bank, the readily available share you should let plants spend, and the days that buys between waterings.
Texture unknown? The Soil Texture Calculator classifies a jar of your soil in a day. The 50% trigger is the standard irrigation rule: refill when half the bank is spent, before plants start working for water.
How to use this calculator
- Pick your texture (jar-test it if you are guessing).
- Set root depth — vegetables mostly 12–24 in, lawns 6–8 in, shrubs deeper.
- Keep the 50% trigger unless your crop is drought-proof or precious.
- Enter the season's daily water use and read the bank, the refill and the interval.
How the maths works: available water capacity × root depth = the bank in inches. It surprises most gardeners twice: silt loam out-banks clay (clay holds more total water but grips much of it beyond root strength), and sand's bank is so small that daily watering there is not a habit but a necessity. The Watering Schedule Calculator approaches from the crop side; this page approaches from the soil side, and the two should roughly agree. The full soil water guide covers field capacity, wilting point and the organic-matter effect.
What are you using this for?
Tell us what you are making, and we will help you do it yourself. Type your project below and we will show you the full method, step by step, using the estimate you just made.
A worked example
A loam bed (AWC 0.17) with 12-inch roots banks 2.04 inches of available water. At the 50% trigger the refill is 1.02 inches — about 51 gallons over a 20 × 4 ft bed — and at 0.2 in/day of summer use the interval is about 5 days. The same bed in sand (0.05) banks 0.6 inches total: a 1.5-day interval. Texture is destiny, and the numbers show exactly how much.
Keep going
Classify your soil with the Soil Texture Calculator; check its drainage with the Soil Drainage Calculator; then set crop-side schedules in the Watering Schedule Calculator and drip run times in the Drip Irrigation Calculator.
Questions people ask
Why does clay hold less AVAILABLE water than silt loam?
Because availability is about grip, not quantity. Clay holds the most total water of any texture but binds a large share so tightly that roots cannot pull it free — that bound share sits below the wilting point. Silt loam holds slightly less in total but releases a bigger fraction of what it holds.
What do field capacity and wilting point mean in practice?
Field capacity is the soil a day or two after a thorough soaking, once gravity has drained what it can — the bank full. Wilting point is the dryness at which plants wilt and cannot recover overnight — the bank empty. Everything a plant ever drinks is withdrawn between those two marks.
Does organic matter really change the bank much?
Measurably, yes — each added percent of soil organic matter raises available capacity, with the biggest proportional gains on sand (where it can approach doubling the bank) and real gains on clay (by improving structure and the releasable share). It is the only amendment that widens the band on every texture.
How do I know my soil's daily water use?
From weather: roughly 0.1 in/day in cool cloudy spells, 0.2 in an average summer, 0.3 or more in heat and wind for a full canopy. Local extension and weather services publish reference evapotranspiration (ET) figures; a rain gauge plus watching the interval that keeps plants unstressed calibrates it for your beds.
Should the trigger always be 50%?
It is the standard compromise between stress and waste. Shallow-rooted or high-value crops justify 30–40% (more frequent, smaller refills); established drought-tolerant plantings can ride to 60%. What the trigger should never be is 'when the plants wilt' — wilting is the overdraft notice, not the schedule.