Soil Drainage Calculator
Drainage arguments end with a hole, a bucket and a stopwatch: the percolation test is the one measurement that settles whether soil is slow, suitable or droughty. This calculator converts your test into inches per hour with a gardener’s verdict, and sizes the gravel for a French drain if the verdict calls for one.
The test: dig a hole about 12 in deep and 6 in across at root depth, pre-soak it (fill and let it drain away once), refill to a measured level, and time the drop. Skip the pre-soak and the first fill flatters you — dry soil drinks on its own account.
How to use this calculator
- Dig the test hole at the depth roots will occupy; pre-soak it fully.
- Refill to a marked level; time how far the water falls.
- Enter drop and minutes — read the rate and the verdict.
- If a French drain is the answer, add the trench dimensions for its gravel volume.
How the maths works: rate = drop ÷ time, scaled to inches per hour. The verdict bands are garden bands, not septic-code bands: under 0.25 in/hr roots suffocate in wet seasons; 0.75–3 in/hr suits most planting; above 6 in/hr the problem flips to drought. Gravel volume is trench volume minus pipe volume — the Gravel Calculator extends it to paths and bases. The full drainage guide covers test technique, what each verdict asks for, and when raised beds beat drains.
What are you using this for?
Tell us what you are making, and we will help you do it yourself. Type your project below and we will show you the full method, step by step, using the estimate you just made.
A worked example
A pre-soaked hole drops 2 inches in 60 minutes: 2 in/hr — squarely in the good range; plant without drainage works. The same garden's low corner drops 1 inch in 4 hours (0.25 in/hr — very slow), so a 30 ft French drain is planned: trench 30 ft × 12 in × 18 in = 45 cu ft, minus the 4-inch pipe's 2.6 cu ft = 42.4 cu ft ≈ 1.57 yd³ of gravel.
Keep going
Know your texture too: the Soil Texture Calculator explains why the rate is what it is, and the Soil Moisture Calculator turns texture into watering intervals. Gravel for other jobs: the Gravel Calculator. Clay that drains slowly may also want the Gypsum Calculator's honest verdict.
Questions people ask
Why must the test hole be pre-soaked?
Because dry soil absorbs the first water into its pores regardless of its drainage structure — the first fill measures thirst, not drainage. Pre-soaking saturates the walls so the timed fill measures only how fast water moves through, which is the number roots experience in a wet week.
My soil drains fast in the test but plants still drown — why?
The hole tests the spot you dug, at the depth you dug it. A compacted layer or clay pan a few inches below root depth can perch water above it while the topsoil tests beautifully. Dig one deeper inspection pit in the problem area and look at the profile — drainage is a whole-column property.
Is a French drain always the fix for slow soil?
Only when the water has somewhere to go — a lower outlet, a ditch, a dry well in better soil below. A drain collects and moves water; it does not delete it. Where no outlet exists, raised beds lift roots out of the problem instead, and are often the cheaper honest answer.
How long does a French drain last?
Wrapped in fabric with washed gravel, decades. Unwrapped, the surrounding soil migrates into the gravel voids and performance fades within a few seasons — the fabric is not an upsell, it is the difference between a drain and a future excavation.
Can I just dig organic matter in to fix slow drainage?
Organic matter improves structure and is always worth adding, but it cannot repeal physics: a clay subsoil at 0.1 in/hr with organic matter is still slow, merely healthier. Amend for the soil's quality; drain (or raise) for its rate — the test tells you which problem you actually have.