YardSolver app iconYardSolver is now an app —Get it on Google Play· iPhone app coming soon
YardSolver
Know what you need. Buy exactly that.

Sprinkler Calculator

Step 1 · Type your numbers Step 2 · See your answer Step 3 · Print your list

Every sprinkler zone applies water at its own rate, and "twenty minutes" means a soaking on one lawn and a sip on another. The fix is one industry formula: precipitation rate = 96.3 × flow ÷ area. This calculator runs it for your zone and turns any target depth — a quarter inch, a full inch — into an exact run time, with cycle-and-soak splitting for clay and slopes.

 

Typical flows: spray heads 1–3 gal/min, rotors 2–5, high-efficiency rotary nozzles under 1. The flow printed for a nozzle assumes its rated pressure — low street pressure delivers less, which the can test in the answer catches.

How to use this calculator

  1. Measure the zone the heads actually cover: length × width.
  2. Count heads and enter each head's flow (nozzle chart, or time a bucket under one head).
  3. Set the depth you want to apply — lawns typically take ½–1 inch per watering.
  4. Read the rate and run time; split into soak cycles on clay or slopes.

How the maths works: one inch of water over one square foot is 0.623 gallons, so inches per hour = flow × 60 ÷ 0.623 ÷ area — and 60 ÷ 0.623 is the industry's 96.3. A zone flowing 12 gal/min over 1,200 sq ft applies 0.96 in/hr, so a full inch takes about 62 minutes. Rotor zones run near 0.5 in/hr; spray zones can exceed 1.5 in/hr — faster than clay can drink, hence cycle-and-soak. The full sprinkler guide covers the can test, seasonal depths and watering-day strategy.

What are you using this for?

Tell us what you are making, and we will help you do it yourself. Type your project below and we will show you the full method, step by step, using the estimate you just made.

A worked example

A 40 ft × 30 ft front-lawn zone (1,200 sq ft) runs 4 rotor heads at 3 gal/min each: 12 gal/min total. Precipitation rate = 96.3 × 12 ÷ 1,200 = 0.96 in/hr. For the lawn's weekly inch: about 62 minutes — on clay, three soak cycles of roughly 21 minutes each rather than one long flood.

Keep going

Laying out a new zone? The Sprinkler Coverage Calculator spaces the heads head-to-head. Drip instead: the Drip Flow Rate Calculator checks line capacity, and the Watering Schedule Calculator sets how much the plants actually need each week.

Questions people ask

How long should I run my sprinklers, in one sentence?
Long enough to apply the depth you intend — for most lawns ½ to 1 inch per session, once or twice a week — and that time is your zone's precipitation rate divided into the depth, which is exactly what this calculator computes. Any answer given in minutes alone, without a rate, is a guess.

What is the tuna-can test?
The field check for this formula: set several flat, straight-sided cans (tuna or cat-food tins) around the zone, run it 15 minutes, and measure the water depth in each. Depth × 4 = your true inches per hour. Cans that differ wildly from each other reveal uneven coverage, not a wrong average.

Why does water run off my lawn before the timer finishes?
Your precipitation rate exceeds the soil's intake rate — classic with spray heads (1.5+ in/hr) on clay (which may drink 0.2 in/hr). The fix is cycle-and-soak: several short runs an hour apart apply the same total with no runoff. Slopes need it even on better soils.

Spray heads or rotors — which apply water better?
They apply at very different rates (sprays fast, rotors slow) and must never share a zone — the sprays would flood while the rotors still thirst. Rotors and rotary nozzles water more uniformly and slowly; sprays suit small, odd-shaped areas. Match the rate to the soil either way.

How much water does a lawn actually need per week?
About 1 inch in mild weather, rising toward 1.5 inches in heat — including rainfall, which is why a rain gauge (or the can test after a storm) belongs in the routine. Lawns trained on deep, infrequent watering root deeper and shrug off short droughts.